Modifications

Aller à : navigation, rechercher

3D-printed horizontal-axis micro wind turbine

88 octets supprimés, 18 octobre 2016 à 13:31
Results at the von Karman Institute
===Results at the ''von Karman Institute''===
Les différents résultats que nous avons obtenus au VKI peuvent être analysésThe different results obtained at the Von Karman Institute can be analysed. Ils représentent l'évolution du They represent the evolution of the power coefficient de puissance ( pourcentage de la puissance reçue du vent en énergie mécaniquepercentage of the wind power converted in mechanical power) en fonction du function of the tip speed ration ratio (rapport entre la vitesse en bout de pale et la vitesse du ventratio between the speed at the end of the blades and the wind speed). Le The tip speed ratio que nous avons utilisé pour le of design des pales valait was 3. Nous pouvons voir sur nos graphes que c'est bien autour de cette valeur-là que le We can see on our graphs that the power coefficient de puissance est le plus importantmaximum is obtained for a tip speed ratio near the designed one. Cette valeur du The power coefficient de puissance atteint reaches 0.4 pour le premier for the first set de pales et of blades and 0.38 pour le for the secondone. Ces valeur sont égales ou supérieures aux micro éoliennes avec lesquelles nous avons comparé notre These values equal or exceed the values of others small wind turbines with wich we compared our prototype.
[[Fichier:vki1.png|Micro-éolienne|400px|center]]
95
modifications

Menu de navigation