Ouvrir le menu principal

Wiki Makilab β

Modifications

3D-printed horizontal-axis micro wind turbine

948 octets ajoutés, 19 octobre 2016 à 11:33
Generator choice
''Pour la traduction française, voyez '''[[Micro-éolienne à axe horizontal imprimée en 3D|ici]]'''.
[[Fichier:micro_eolienne_rotor1.jpg|Micro-éolienne|300px|right]]
''Pour la traduction française, voyez '''[[Micro-éolienne à axe horizontal imprimée en 3D|ici]]'''.
===Results at the ''von Karman Institute''===
Les différents résultats que nous avons obtenus au VKI peuvent être analysésThe different results obtained at the Von Karman Institute can be analysed. Ils représentent l'évolution du They represent the evolution of the power coefficient de puissance ( pourcentage de la puissance reçue du vent en énergie mécaniquepercentage of the wind power converted in mechanical power) en fonction du function of the tip speed ration ratio (rapport entre la vitesse en bout de pale et la vitesse du ventratio between the speed at the end of the blades and the wind speed). Le The tip speed ratio que nous avons utilisé pour le of design des pales valait was 3. Nous pouvons voir sur nos graphes que c'est bien autour de cette valeur-là que le We can see on our graphs that the power coefficient de puissance est le plus importantmaximum is obtained for a tip speed ratio near the designed one. Cette valeur du The power coefficient de puissance atteint reaches 0.4 pour le premier for the first set de pales et of blades and 0.38 pour le for the secondone. Ces valeur sont égales ou supérieures aux micro éoliennes avec lesquelles nous avons comparé notre These values equal or exceed the values of others small wind turbines with which we compared our prototype.
[[Fichier:vki1.png|Micro-éolienne|400px|center]]
==Replicability==
 
=== Generator choice ===
 
Normally, any DC generator can be used if the design of the nacelle is adapted. It has to be kept in mind that the nominal rotational speed of the set of blades and his nominal torque must remain lower than those of the generator. Indeed, if the rotational speed exceed its maximum value, it may cause dommages to the generator. If the torque exceed the maximum one, it will be impossible to brake the wind turbine and will cause the destrution of the generator. The designed rotational speed is fixed by the tip speed ratio for the nominal wind speed. The maximum torque is given by the matlab program for any type of set of blades.
 
=== Blades design ===
 
Thanks to our matlab program (available in file section), it is possible for everyone to create his own set of blades. Several parameters can be modified and put in arguments: profile type, radius of the blades, designed wind speed and designed wind speed ratio.
 
=== Regulation ===
== Files ==
[[Fichier:thesis.pdf|pdf du mémoire]]
[[Catégoriehttps:Projets]//makilab.org/sites/default/files/microwindturbine_CAD_Igot_Snyers.zip CAO files]
95
modifications